原始文件(SVG文件,尺寸为750 × 600像素,文件大小:5 KB)


描述 750 mm by 600 mm (30 in by 24 in) Ohio State Route shield, made to the specifications existing photos found on [Dan Garnell’s http://www.state-ends.com/ohio/ Ohio Highway Ends]. Uses the Roadgeek 2005 fonts. (United States law does not permit the copyrighting of typeface designs, and the fonts are meant to be copies of a U.S. Government-produced work anyway.)
日期
来源 自己的作品
作者 Homefryes
授权
(二次使用本文件)
Public domain This file is in the public domain because it comes from the Ohio Manual of Uniform Traffic Control Devices, sign number M1-5, which states specifically in its introduction, on page I-1 that:
Any traffic control device design or application provision contained in this Manual shall be considered to be in the public domain. Traffic control devices contained in this Manual shall not be protected by a patent, trademark, or copyright, except for the Interstate Shield and any items owned by FHWA.

说明

添加一行文字以描述该文件所表现的内容

此文件中描述的项目

描繪內容

文件历史

点击某个日期/时间查看对应时刻的文件。

日期/时间缩⁠略⁠图大小用户备注
当前2012年6月23日 (六) 18:052012年6月23日 (六) 18:05版本的缩略图750 × 600(5 KB)Highway Route Marker BotUpdate per User:Highway Route Marker Bot/Requests#Ohio state route markers using File:Ohio 3d template.svg.
2006年8月19日 (六) 13:412006年8月19日 (六) 13:41版本的缩略图750 × 600(9 KB)Homefryes== Summary == {{Information |Description=750 mm by 600 mm (30 in by 24 in) Ohio State Route shield, made to the specifications existing photos found on [Dan Garnell’s http://www.state-ends.com/ohio/ Ohio Highway Ends]. Uses the [http://www.triskele.com/

全域文件用途

元数据